Dear visitor,
VoIPLine Telecom uses latest technologies in web development. Unfortunately your web browser is not supported and some parts of our we site may not be displayed correctly. Below are links to the latest versions of Google Chrome, Mozilla Firefox and MS Edge browser.

Knowledge base centre

PBX SIP Device ZoiPer for Android Configuration

Firstly you will need to download ZoiPer from the Google Play Store. Search for 'ZoiPer' in the store, and you should see the following:


Proceed to install ZoiPer. Once installed, you will then need to configure the application in order to make and receive calls.

Upon completing the installation, you should see the following screen when launching ZoiPer.


Before we can configure ZoiPer, you will need to log in to your customer portal, then navigate to 'SIP Devices' located in the lower left corner of the PBX tab interface. You should have the following details open for the SIP Device you wish to configure:


ZoiPer requires these details to be entered in a particular format in order for it to work correctly.

You will need to enter the details to match the format in the following image.



Once you enter these details, click on "Create Account" to continue. Before doing this, ensure that all details are correct by double checking everything, and making sure to check each character in the password as it is entered.

Once clicking "Create Account" it will ask you to confirm some details, such as the Host Domain etc. Continue to fill these with the details you have from 'SIP Devices' on your PBX tab.

Upon Completing this series of forms, you should now have an active, registered account.
To check the status of your account if it is not shown, click on Settings > Accounts.

Here you should see something like the following:


If the account status is showing 'Ready' then you are set up. If you have issues, or this is repeatedly giving you errors, our support team will be able to assist.

To dial and begin making calls, click on the dial pad shortcut located in the bottom middle of your screen. Icon shown below:


Make sure before you close your PBX tab, that you Apply Configuration for all changes made, else you may have some features or extensions not working as intended.

See Also

Configuring a SIP Device on Grandstream Wave for Android

PBX SIP Device Bria Teams Configuration

PBX User Object & SIP Device Configuration

A quick search will help you find answers, to most of the FAQ's.
If you are unable to a find solution from the knowledge base centre, please contact
your service provider for technical assistance.